AC1200 Wireless Dual Band Gigabit Router
• Black List - Select to block only the Internet activities specified in the table
• Description - Displays the name of the rule and this name is unique.
• Hosts Under Control - Displays the host selected in the corresponding rule.
• Target - Displays the target selected in the corresponding rule.
• Schedule - Displays the schedule selected in the corresponding rule.
• Edit - Here you can edit an existing rule.
• Add - Click to add a new rule entry.
• Delete All - Click to delete all the entries in the table.
• Delete Selected - Click to delete selected entries in the table.
To add a new rule, follow the steps below.
1. Toggle on to enable Access Control.
2. Select Whitelist or Blacklist.
3. Click Add and enter a brief description for the rule.
4. Click Configure in the Hosts Under Control column to add a host, then click Apply.
• Host Description - In this field, create a unique description for the host.
• Mode - Here are two options, IP Address and MAC Address. You can select either of
them from the drop-down list.
If the IP Address is selected, you can see the following item:
- 38 -
To Next Page
Loading...
Need help?
General
