Mercusys MW300D - Page 56

MW300D
300Mbps Wireless N ADSL2+ Modem Router
- 49 -
Step 2: Select the IP/MAC Filter Set Index and IP/MAC Filter Rule Index for the rule, then
select the Interface PVC0, and select the Direction Outgoing for the first rule.
Note:
If you want to make the rule take effect, please select Yes to activate the rule.
Step 3: Enter the MAC Address and select the Unmatched rule as Next.
Step 4: Finally, click SAVE to save the entry.
Step 5: Go to Step 2 to configure the next rule: Block the PC with MAC address
00:0A:EB:00:07:BE to access the Internet.
Note:
After you complete the MAC filter rules for the example, the Filter list will show as follows. You
can enter the IP / MAC Filter Set Index to view the information about the rule.
Other operations for the entries:
Select IP / MAC Filter Set Index and IP/MAC Filter Rule Index to view or modify the entry.
Select IP / MAC Filter Set Index and IP/MAC Filter Rule Index to locate the specific rule, and
then click DELETE to delete the entry.
4.4.2.3 Application Filter
Select Application Filter as the Filter type, and then you can configure the filter rules based on
application.