MC³ 24.96.EX O&M Manual Page 19 08/14/01 4:34 PM/LDD
Sub-Total
This button clears the Sub-Total and any remaining pulses for the external counter.
Clean Screen
If the touch screen gets smeared or very dirty it may be necessary to clean the screen.
This function gives you 60 seconds to clean the screen without affecting the controller.
Diagnostics
This selection takes you to the Diagnostic menu. See Diagnosing Problems on page 58
for further explanation on the Diagnostic menu system.
Alarms
This selection allows you to view the status of all alarms at any time. For more
information on alarms see General Alarms on page 12.
Print
Touch this selection to enter the Print Line Editing and Printout Selection screens (see page 19 for
more information).
Print Line Editing and Printout Selection
This menu allows you to edit or to print one of the four available print strings. Print strings are lines
of characters that convey information to a printer for permanent record.
Touching on of these buttons will send the selected print string to the printer.
This selection allows editing of the strings. The string to edit is selected in the
function.
To Next Page
Loading...
Need help?
General
