12.09.05 rev 1.0
41
47.
Regular Maintenance Cont.
Multigen Transfer Module and Dolly
COMPONENT
VISUAL
OPERATIONAL
NOTES
Towing Unit Pole End
(Optional)
9 9
Check the spring to ensure it holds the pole at the correct tension so that it
does not drop down and it springs back instantly when pushed down The
spring must be replaced annually
Towing Pin (Optional)
9 9
Check the pin to make sure it is not damaged.
Castors
9 9
Ensure the brakes function correctly and the wheels are free and not
damaged. Check that the retaining nuts are tight and not entangled with mop
strings or other materials.
Transfer Module locking
pin
9 9
Check to make sure the pin locates and locks the transfer module into place
correctly
Locking Arm for the
docking system.
9 9
Check to make sure it is not damaged and that it locates and locks correctly
into the Multigen docking plate. Check tension of the spring.
Docking Arm and Pedal
9 9
Check to make sure it is not damaged and that it locates and locks correctly
into the Multigen docking plate.
Docking Pin
9 9
Check the pin to make sure it is not damaged and that it locates correctly into
the Multigen docking plate
Transfer Module
9 9
Clean the bottom nylon rollers and lubricate with food grade silicone spray.
Ensure the module is not damaged.
Transfer Module
9 9
Check all support guides.
To Next Page
Loading...
