Time synchronization warning.
After confirmation A 1785 PV Remote WL
accepts time from instrument.
Warning that time synchronization is not
possible while remote unit is logging.
Warning that STC / nominal values cannot be
calculated and displayed, due to missing or
invalid PV module or environmental data.
Voltage readings may be incorrect.
Possible causes:
• Input V-meters failure,
• unbalanced voltage DC+/PE or DC-/PE
on PV system.
PV Remote WL not found during
synchronization.
Possible reasons:
• PV Remote WL is turned off.
• No Wi-Fi connection between PV
Remote WL and the instrument.
• Wi-Fi communication is out of range.
Synchronization of test results is not possible
while remote unit is logging.
To Next Page
Loading...
