METREL MI3115 - Operations on Measurements

MI 3115 PV Analyser
Memory Organizer
32
5.1.2 Operations on measurements
Start Test
Start a new measurement
Clone
Copy selected measurement as an empty measurement under
the same Structure object
Copy, Paste
Copy a selected measurement as an empty measurement to
any location in structure tree
Add Measurement
Add an empty measurement
Comment
Add / view a comment to the measurement
Delete
Delete a measurement
Retest, Start Test
Run a new measurement or Auto Sequence with same
settings as selected measurement
View
Enter menu for viewing details of Single test or Auto Sequence
Parameters
View / edit parameters
Retest
Run a new measurement or Auto Sequence with same
settings as selected measurement
Hint
When a new empty measurement is added (single test or Auto sequence) the
PV module selected in the belonging object will be adopted by default. If needed,
it is possible to change the PV module and its number in the measurement.