METREL MI3115 - Single Test Measurements; Visual Inspection; R Low, 200 Ma Resistance Measurement

MI 3115 PV Analyser
Single tests
47
Once the stored measurements from selected workspace are synchronized/updated with
data from A 1785 - PV Remote WL, parameter Environmental data is changed from Manual
to Remote.
Note
•
6.5
6.5.1 Visual inspection
Test results / sub-results
Pass, Fail, Checked
Test circuit
6.5.2 R low, 200 mA resistance measurement
Test results / sub-results
R
Resistance
R+
Result at positive test polarity
R-
Result at negative test polarity
Test parameters
Comment 1
User comment
Comment 2
User comment
Test limits
Limit (R)
Limit (R) [Off, Custom, 0.05 Ω 20.0 Ω]
Additional options
Calibrate
Calibrate see Compensation of test leads.