METREL MI3115 - Wi-Fi Settings; Bluetooth Initialization; Initial Settings

MI 3115 PV Analyser
Instrument operation
23
4.6.2 Wi-Fi settings
Refer to chapter Communication with A 1785 PV Remote WL and A 1785 PV Remote WL
Instruction manual for detailed information.
4.6.3 Bluetooth initialization
In this menu internal Bluetooth / Wi-Fi module is reset.
4.6.4 Initial Settings
In this menu internal Bluetooth / Wi-Fi module will be initialized and the instrument
settings, measurement parameters and limits will be set to initial (factory) values.
WARNING
Following customized settings will be lost when setting the instruments to initial
settings:
• Measurement limits and parameters.
• Global parameters and System settings.
• Opened Workspace and Auto Sequence® group will be deselected.
• User will be signed out.
Note
Following customized settings will stay:
• Profile settings
• Data in memory (Data in Memory organizer, Workspaces, Auto Sequence® groups
and Auto Sequences®)
• User accounts