METREL MI3115 - Measurement Statuses

MI 3115 PV Analyser
Memory Organizer
33
5.1.3 Measurement statuses
Measurement statuses indicate the status of a measurement or a group of measurements in
the Memory Organizer.
Statuses of Single tests
Passed finished single test with test results
Failed finished single test with test results
Finished single test with test results and no
status
Empty single test without test results
Overall statuses of Auto Sequence
or
At least one single test in the Auto
Sequence passed and no single test failed
or
At least one single test in the Auto
Sequence failed
or
At least one single test in the Auto
Sequence was carried out and there was no
other passed or failed single tests
or
Empty Auto Sequence with empty single
tests
Overall status of measurements under structure elements
Overall status of measurements under each structure element gives a fast information on
tests without expanding tree menu.
Options
There are no measurement result(s) under selected
structure object. Measurements should be made.
One or more measurement result(s) under selected
structure object has failed. Not all measurements under
selected structure object have been made yet.
All measurements under selected structure object are
completed but one or more measurement result(s) has
failed.
No status indication if all measurement results under each
structure element / sub-element have passed or are
without measurements.