• Nominal and STC values will change accordingly.
Measured data and environmental data will stay the same.
After update is finished, confirmation with number of updated structures and
measurements is displayed.
All updated structures and measurements are saved automatically. Undo is not possible.
Procedure on selected measurement
In selected measurement in Memory Organizer, enter Parameters to edit:
- Module,
- Number of modules in PV string and
- Number of PV strings.
Measurement will be updated after confirmation.
• Nominal and STC values will change accordingly.
Measured data and environmental data will stay the same.
Save updated measurement results or undo modifications.
To Next Page
Loading...
