Metrohm 780 - Method Parameter in the Conc Mode

9.3 Menu structures
148
780/781 pH/Ion Meter, Manual
9.3.5 Method parameter in the Conc mode
PARAMETER Conc
├ meas.type
│
├ ion parameters
│ ├ ion type ────┬ F(-1), I(-1), K(+1), ...
│ │ └ own ┬ ion name
│ │ └ ion charge
│ └ conc.unit ────┬ mol/L, %, ppm, ...
│ └ own ─ unit name
├ measuring parameters
│ ├ electr.id
│ ├ drift
│ ├ temperature
│ ├ method
│ ├ delta measurement ─ ON ─── reference
│ └ stirrer ─────┬ ON ─── stirring rate
│ └ control ┬ stirring rate
├ calculation parameters ├ prestir pause
│ ├ smpl.size ├ stir time
│ ├ V total └ poststir pause
│ ├ factor
│ └ smpl.size unit
│
├ calibration parameters
│ ├ temperature
│ ├ drift
│ ├ report
│ ├ cal.interval
│ ├ no.of standards
│ └ addition ────┬ manual ┬ conc.1...conc. n
│ └ auto ───┬ min.conc.
│ ├ max.conc.
│ ├ V init
│ ├ no.of Exchange Units
│ ├ conc.1...n
│ └ V Exchange Unit 1...n
├ limits Conc
│ └ state ───── ON ────┬ u.limit
│ ├ u.hyst.
│ ├ l.limit
│ └ l.hyst.
├ limits T
│ └ state ───── ON ────┬ u.limit
│ ├ u.hyst.
├ plot parameters ├ l.limit
│ ├ left mar. └ l.hyst.
│ ├ right mar.
│ ├ left marg.T
│ └ right marg.T
│
└ preselections
├ req.ident
└ req.smpl.size
only meas.type:
direct
all meas.types