￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Installation
858 Professional Sample Processor
￭￭￭￭￭￭￭￭
31
3
Connecting the aspiration side
Place a 6.2744.030 tubing olive (29-2) on the aspiration side of the
pump tubing.
4
Connecting the pressure side
￭ Slide the union nut (29-6) of the 6.2744.160 pump tubing con-
nection (without filter) onto the pump tubing.
￭ Select a suitable adapter (29-7) (depends on the outer diameter
of the pump tubing) and slide it onto the pump tubing.
￭ Place the tubing olive (29-8) onto the pump tubing.
￭ Screw the union nut (29-6) tight on the tubing olive (29-8).
5
Inserting the tubing cartridge
￭ Hang the tubing cartridge in the mounting bolt and press it
underneath in the cartridge holder until the snap-action lever
snaps in.
Figure 30 Inserting the tubing cartridge
To Next Page
Loading...
