Metrohm 917 Coulometer - Page 58

7.3 Creating a sample table
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
50
￭￭￭￭￭￭￭￭
2
Entering the sample data
￭ Tap on [Sample table].
The sample table is still empty. The first line is highlighted.
￭ Tap on [Edit].
￭ Tap on the selection symbol next to the input field Method.
￭ Select a saved method.
A particular method can be selected for each sample which is to
be processed. If no method is specified, then the currently loaded
method is executed.