8.1 Creating a user list
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
52
￭￭￭￭￭￭￭￭
8 Setting up the user administration
If different persons are working on the instrument, we recommend that
the user administration of the 917 Coulometer be used. This means that
everyone can use their user identification to log on to the instrument. The
reports will then automatically contain the respective user name.
In addition, a dialog level can be set up for each user. In addition to the
expert dialog, with access to all functions and settings, a routine dialog
can be selected with limited access rights. The available functions and dia-
log areas can be configured for the routine dialog.
Administrator rights can be assigned to users who are permitted to admin-
ister methods and to make configuration settings.
If you create a user list, then you can use it in different ways. You can
apply different combinations of login options. Three possibilities are listed
in the following:
￭ User name can be selected in the main dialog without login
￭ Automatic login with USB flash drive
￭ Login with password
8.1 Creating a user list
The creation of a user list is required for all of the possibilities of the user
login.
Defining users
Proceed as follows:
1
Opening the user administration
￭ In the main dialog, tap on [System].
￭ Tap on [System settings].
￭ Tap on [User admin.].
To Next Page
Loading...
Need help?
General
