Digital Input Modules
24V Common Input Module IOP330
48V Common Input Module IOP331
Metso Automation MAX Controls Inc. • 277596 •
7-3
Module specifications
IOP 330 – 24V IOP331 – 48V
Rated Input Voltage 24 Volts nominal, 40 Volts
maximum
48 Volts nominal, 60 Volts
maximum
Input current per point 5 mA @ 24 Volts 5 mA @ 48 Volts
On-State Voltage 8.5 Volts 22 Volts
Isolation
User input to logic
250 VAC continuous, 1,500 VAC for 1 minute
Indicators 1 LED per point provides status indication.
LED provides power and communication indication.
LED provides loop power disconnect status
I/O Bus Address One address
Input Power
(from 24V system supply)
50 mA
To Next Page
Loading...
Need help?
General