CDP301 Dew-Point Tester User’s Manual
Michell Instruments 5
INSTALLATION
2.1 Sample Gas Connections
WARNING
Ensure process sample gas supply line is well ushed
through to clear any liquid/debris present, prior to
connecting onto the dew-point tester.
Sample gas connections (without sample system) are:
• Sample Gas Inlet: 1/8” NPTF
into Flow Restrictor
(100 barg/1450 psig maximum supply pressure)
• Sample Gas Outlet: 1/8” NPTF into Flame Arrestor
To Next Page
Loading...