CDP301 Dew-Point Tester User’s Manual
Michell Instruments 39
MAINTENANCE
Figure 30
Camera USB Connection
Figure 31
Camera Sensor In-line Connector
5.3.3 Removing Particulates
• Use the air blower to remove particulates from the inside of the
measurement cell. Pay particular attention to the mirror surface (see
Figure 32, Checking the mirror surface) and surroundings.
• Inspect the inside of the cell using the eyeglass and torch to conrm that
all particulates have been removed.
Figure 32
Checking the Mirror Surface
To Next Page
Loading...