Michell Instruments CDP301

CDP301 Dew-Point Tester User’s Manual
46 97585 Issue 1, June 2020
APPENDIX B
Appendix B Hazardous Area Certication
The CDP301 Dewpoint Tester is certied compliant to the ATEX Directive (2014/34/
EU), and IECEx for safe use within Zone 1 and Zone 2 Hazardous Areas and has been
assessed so by CML (Certication Management Ltd).
B.1 Product Standards
This product conforms to the Standards:
EN60079-0:2012/A11:2013 IEC60079-0:2011
EN60079-1:2014 IEC60079-1:2007
EN 60079-11:2012 IEC 60079-11:2011
B.2 Product Certication
This product is attributed with the product certication codes:
ATEX
II 2 G Ex db ia IIB+H2 Gb
T3 (Tamb -30°C to +50°C)
B.3 Global Certicates/Approvals
ATEX CML19ATEX1373X
IECEx IECEx CML 19.0115X
cQPSus LR1507-02
CDP301 Dewpoint Tester is also certied by QPS (cQPSus) for use in Hazardous
Locations:
Class I, Division 1, Groups B, C & D
T3 (Tamb -25°C to +50°C)
Class I, Zone 1
AExd db ia IIB+H2 Gb Ex db ia IIB+H2 Gb
T3 (Tamb -30°C to +50°C)
These certicates can be viewed or downloaded from our website at:
http://www.michell.com