CDP301 Dew-Point Tester User’s Manual
Michell Instruments 35
MAINTENANCE
4.6 Data Access
Below is the procedure for downloading saved logs, images and/or video les from the
CDP301.
Warning: This work should only be carried out in a non-hazardous (safe) area.
1. Ensure the CDP301 is turned on.
2. Place the CDP301 display downwards on a solid, at surface.
3. Unscrew the base of the CDP301.
4. Attach a USB B connector to the CDP301 USB Port (See Figure 26, USB
Port) and the other end to a laptop or PC.
5. The CDP301 will be detected and can be accessed as an external mass
storage device.
6. Copy or cut and paste the required les onto the laptop or PC.
Figure 26
USB Port