Michell Instruments CDP301 User Manual

CDP301 Dew-Point Tester User’s Manual
Michell Instruments 23
OPERATION
Log Data
Activates/Deactivates the acquisition of dew-point data. If Data logging is OFF, then
data is not logged and images are not saved.
Log Images
Activates/Deactivates the automatic acquisition of images whilst log data is active.
Images can only be automatically logged if LOG DATA as above is ON. But if LOG
DATA is ON then you can choose not to save any images automatically. Does not aect
manual saving of images.
Image Rate
The rate (Min 5 seconds, Max 60 seconds) at which images are taken in Auto mode
Image Format
Choice of PNG or JPEG format for saving images
Start New Log
Creates a new log data folder with new log data le (.csv). Uses this folder and le for
logging images and data.
Site
Choice of user-dened (in Site Label menu) reference to the location of the measurement.
This label will be logged in the log data le with each measurement.
Max video size
The maximum le size (in MB) for a single video le

Michell Instruments CDP301 Specifications

General

Brand	Michell Instruments
Model	CDP301
Category	Test Equipment
Language	English