MICRODOS Pooltec - Programming the System; Password; Programs: Programming Recirculation Pump

Installation, Programming and Maintenance Microdos Pooltec
Rev. 1.0 EN
19
4.5. PROGRAMMING THE SYSTEM
To configure the various function of MICRODOS POOLTEC, you can access the programming in 2 different ways:
4.5.1 PASSWORD
If you attempt to access the EXPERT programming, you need to enter password 11222.
4.5.2. PROGRAMS: PROGRAMMING RECIRCULATION PUMP
Change the recirculation pump programs by pressing the icon. The following window will appear.
Programming buttons:
Programs, Settings.
By holding the buttons
down, you can access
the corresponding
settings channel to
change commands.
To select any
program, press
the ON/OFF
button next to
each program.
To enter any program for the
configuration, press on the
chosen program.