Installation, Programming and Maintenance Microdos Pooltec
Rev. 1.0 EN
36
4.5.3.6.3. REPEAT TYPE
This type of output repeats the functioning of the selected inputs or outputs (one or more).
The output is activated when an input or an output among the chosen ones is activated.
It is possible to activate this output when the device is performing a pH priority and a dosing delay.
NOTE:
1. Inside the “INCLUDE” section you can choose up to 4 INPUTS or OUTPUTS you wish to repeat.
-
Press the arrow ▼ to view the drop-down menu for the choice.
2. for the OUTPUT repetition it is recommended to include only one option.
3. Always press SAVE to make the modification effective.
Possible INPUT to repeat:
• - (not set)
• IN1
• IN2
• IN3
• IN4
• IN5
• HEAT
• PUMP
• FL
• PH
• PH PRIORITY
• DOSING DELAY
INPUT/OUTPUT activates the relative
column for the choice.
Defines the output functioning:
Normally Open (N.O).
Normally Closed (N.C).
Possible OUTPUT to repeat:
• - (not set)
• PUMP
• P1
• P2
• P3
• P4
• D2
• LIGHTS
• PH
• HEAT
To Next Page
Loading...