Installation, Programming and Maintenance Microdos Pooltec
Rev. 1.0 EN
21
4.5.2.2. USER PROGRAM
Configure up to 3 daily timers to program the activation of the recirculation pump.
NOTE:
1. To activate the program:
- With a short press on the day, you access in the settings for the selected day.
- With a second short press on the day, the program is activated on that day (blue colour).
- If you wish to use the daily program already set, copy it for the entire week by pressing SET ALL WEEK.
2. Weekdays colour:
a. BLUE: the program is active on the day.
b. GREY: the program is not active on the day.
3. Always press SAVE to make the modification effective.
4. Values of On at “00:00” and Off at “00:00” → no programming
To Next Page
Loading...