EasyManua.ls Logo

Microhard Systems P900 User Manual

Microhard Systems P900
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Pico Series - P900
900MHz Spread Spectrum Modem
Document: Pico Series P900 Operating Manual.v1.8.7
Date: June 2016
Firmware: v1.19
Operating Manual
150 Country Hills Landing NW
Calgary, Alberta
Canada T3K 5P3
Phone: (403) 248-0028
Fax: (403) 248-2762
www.microhardcorp.com

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Microhard Systems P900 and is the answer not in the manual?

Microhard Systems P900 Specifications

General IconGeneral
BrandMicrohard Systems
ModelP900
CategoryModem
LanguageEnglish

Summary

Important User Information

Warranty and Legal Notices

Details product warranty, disclaimers, indemnification, and proprietary rights.

Regulatory Compliance

Covers FCC RF exposure requirements, EIRP limits, and equipment labeling.

Product Overview and Specifications

Performance Features

Key capabilities of the Pico Series P900 modem, including transmission and connectivity.

P900 Technical Specifications

Electrical, environmental, and mechanical specifications for the P900 modem.

Hardware Description

Mechanical Drawings and Pinouts

Mechanical dimensions, pad landing, pin descriptions, and pin-out comparisons.

Electrical Characteristics

Test conditions, voltage/current ratings, I/O, and ADC characteristics.

P900 Enclosed Unit Details

Features, drawings, mounting, connectors, and LED indicators for the enclosed unit.

Network Configuration

Mesh Network Configuration

Setup and operation for Mesh networks, including modes, topology, and parameters.

Point-to-Point (PTP) Configuration

Configuration for PTP networks, covering modes, topology, and operational settings.

Point-to-Multipoint (PMP) Configuration

Configuration for PMP networks, including modes, topology, and operational settings.

Register and Command Reference

AT Commands Reference

Guide to AT commands for controlling modem functions and settings.

Settings (S) Registers Reference

Detailed reference for all available S registers and their configuration values.

Installation Guide

Key Installation Factors

Factors for radio network deployment: topology, power, interference, and distance.

Path Calculation and Antenna Setup

Radio path calculation, antenna selection, and installation procedures.

Appendices

Quick Reference Guides

Concise references for AT commands and S registers.

Firmware Upgrade Procedures

Procedures for updating the modem's firmware using AT utility or commands.

Technical Diagrams and Lists

Includes serial interface, schematics, adapter boards, and approved antennas.

Related product manuals