4 Microtek ScanWizard EZ - Professional Mode Reference Manual
Toggling among EZ, Advanced, and Professional Modes
When the ScanWizard EZ - Professional Mode is activated, you may toggle
among the EZ mode, Advanced mode, and Professional mode by simply clicking
on the corresponding button in the Preview window of the Professional mode.
Click on the EZ Mode button, which is the 2nd button counted from the right
side in the Preview window, to switch to the ScanWizard EZ - EZ Mode.
Click on the Advanced Mode button, which is the 1st button counted from the
right side in the Preview window, to switch to the ScanWizard EZ - Advanced
Mode.
To Next Page
Loading...