24 Microtek ScanWizard EZ - Professional Mode Reference Manual
Cursor Auxiliary Lines
This command allows you to show or hide cursor auxiliary lines to help you
define a scan frame or measurement off the rulers more precisely. Using the
cursor auxiliary lines, you can also read the measurements of your ruler more
easily.
Cursor auxiliary lines (black
dotted line) on the x and y
axis
Scan frame
To use this feature:
1. Choose the Cursor Auxiliary Lines command in the Preferences menu.
From the submenu that appears, select how the cursor lines will appear.
• On both x (horizontal) and y (vertical) axes
• On x axis only
• On y axis only
• None (no cursor lines)
2. Click the Scan Frame tool.
To see how the cursor auxiliary lines work, draw a scan frame. Click on the
top left corner of the image as your starting point, then drag down
diagonally to form a scan frame. As you draw the scan frame, cursor lines
will appear to help you draw the scan frame precisely. When you release the
mouse, your scan frame will be aligned with the cursor lines.
To Next Page
Loading...
Need help?
General
