Reference: The Settings Window 81
6.6.
6.6.
6.
Using CMYK or RGB values as "FrUsing CMYK or RGB values as "Fr
Using CMYK or RGB values as "FrUsing CMYK or RGB values as "Fr
Using CMYK or RGB values as "Fr
om" and "Tom" and "T
om" and "Tom" and "T
om" and "T
o" Selective colors. Thiso" Selective colors. This
o" Selective colors. Thiso" Selective colors. This
o" Selective colors. This
can be done in one of the following ways:can be done in one of the following ways:
can be done in one of the following ways:can be done in one of the following ways:
can be done in one of the following ways:
• Define such requirement in the
CMS SetupCMS Setup
CMS SetupCMS Setup
CMS Setup dialog box.
• Click on the expansion arrow provided in the
Selective ColorSelective Color
Selective ColorSelective Color
Selective Color dialog
box.
Then proceed to set
FrFr
FrFr
Fr
omom
omom
om and
TT
TT
T
oo
oo
o settings as it were done under LCH mode.
Note that changes to LCH settings remain visible as you manipulate colors in
CMYK/RGB mode.
CMYK/RGB expansion arrow
Add To & From colors by clicking the NEW button.
Enable/Disable selected color by clicking on check
mark
Delete selected color (enclosed in a frame) by clicking
DEL button
Click any of the From (left) or To (right) colors to
redefine the "From" settings of the particular color
RGB/CMYK select arrow
Click NEW button to
correct additional
color
Click DEL button to
delete a selected
color
To Next Page
Loading...
Need help?
General
