Microtest 8740 - High Voltage Setting Edit (HV)

52
 Pin (Positive pin) Positive pin setting; please enter the pin selected.
  Pin (negative pin) Negative pin setting; please enter the pin selected.
 Standard value Standard value setting; please enter the value needed.
 Error % Error value setting; please enter the setting value according to your needs, it ranges
from 0-9999.9. Press S6 [SAME] to set all the error % to the same value.
– >= STD Press S1 [Greater than] to set the error % as greater than or equal to the standard
value.
– <= STD Press S2 [Less than] to set the error % as less than or equal to the standard value.