Midmark M9 - Unloading Hot Trays and Cassettes

English - 24
003-2707-99
© Midmark Corporation 2015 TP202 20-42-FO-00014 Rev A1 C2169
Unloading Hot Trays / Cassettes
(Using the Optional Tray / Cassette Tool)
Caution
Only use the 9A307001 Tray / Cassette tool with Midmark manufactured trays.
Trays / cassettes may be HOT - use care when removing or transporting.
Hold the tray level and slightly elevated to prevent it from shifting and becoming dislodged.
Failure to comply may result in personal injury due to burns.
Step 1: Assemble the tray / cassette tool.
A) Slide the proper plate into the handle as shown.
Note: There are three plates included. Each plate is designed for
a specific purpose. (M9 trays, M11 trays, cassettes)