Miele G2000 - Page 110

Technical Information
110
G1000 / G2000 Dishwashers
Control
Dial
Position
Function Programming Display
Flashing Rhythm of
Rinse LED
Long Short Display
Pos. 22: Program
running time
reduction
To move through the
levels, turn the control
dial to the 11 o’clock
position. Press the
Stop/Start button 3x.
Turn the control dial to
the 6 o’clock position.
To change the setting,
press the Start/Stop
button.
Options: Rinse LED
is off = program
running time per
factory setting; Rinse
LED flashes =
shortened program
running time.
Program-dependent
short-cut due to a
decrease in
temperature and/or
the removal of hold
times.
- - -
Pos. 23: Water
quantity normal /
increased
To move through the
levels, turn the control
dial to the 11 o’clock
position. Press the
Start/Stop button 3x.
Turn the control dial to
7 o’clock position. To
change the setting,
press the Start/Stop
button.
Options: Rinse LED
is off = normal water
amount; Rinse LED
flashes = increased
water amount.
- - -
Long Short Display
Pos. 26: Second
interim rinse
selection
To move through the
levels, turn the control
dial to the 11 o’clock
position. Press the
Start/Stop button 4x.
Turn the control dial to
3 o’clock position. To
change the setting,
press the Start/Stop
button.
Options: Rinse LED
is off = program
sequence per factory
setting; Rinse LED
flashes = second
interim rinse added.
- - -
11
o’clock
Long Short Display
Options: Rinse LED
is off = normal drying;
Rinse LED flashes =
enhanced drying
activated.
Pos. 27:
Enhanced drying
To move through the
levels, turn the control
dial to the 11 o’clock
position. Press the
Start/Stop button 4x.
Turn the control dial to
5 o’clock position. To
change the setting,
press the Start/Stop
button.
- - -
Table 6.5: G2020 Programming Mode Options (cont. from Table 6-4) (cont. to Table 6-6).