Technical Information
26
G1000 / G2000 Dishwashers
3.4 General Operation
3.4.1 Novotronic Controls
1. Ensure the Spray Arms are not blocked.
2. Close the door.
3. Turn on the dishwasher. The “Start” Indicator will flash.
4. Select a wash program by turning the Program Selector to the left or right to the
desired wash program.
5. Press the “Start” button.
3.4.2 Touchtronic & Navitronic Controls
1. Ensure the Spray Arms are not blocked.
2. Close the door.
3. Turn on the dishwasher. The main menu shows in the display (Figure 3-5). If the
memory function is selected, the last selected program is displayed.
Figure 3-5: Display (Main Menu)
Note
Information about the selected program can be displayed by
touching the i control.
Select the desired program. The display changes to the program menu (Figure 3-6)
Figure 3-6: Display (With Selected Program)
To Next Page
Loading...
