Technical Information
G1000 / G2000 Dishwashers
6.3 Inspira Series
6.3.1 Inspira Series - G2140 & G2150
6.3.1.1 G2140 / G2150 - Programming Mode
Accessing
1. Press and hold the Start/Stop button.
2. Switch on the machine.
3. Release the Start/Stop button.
4. Immediately press and release the Start/Stop button 5 times and at the 5
th
time hold until the Start/Stop LED flashes rapidly.
5. Release the Start/Stop button
If the Start/Stop LED does not flash, repeat the procedure.
Acknowledgement indicator
Successful accessing of the Service Dept. programming mode is indicated by a rapid
flashing Start/Stop LED (5 Hz)
Options
Refer to Tables: 6-17 through 6-20.
129
To Next Page
Loading...
