Technical Information
134
G1000 / G2000 Dishwashers
6.3.1.2 G2140 / G2150 Service Mode
Accessing
1. Press and hold the Start/Stop button.
2. Switch on the machine.
3. Release the Start/Stop button.
4. Immediately press and release the Start/Stop button 3 times and at the 3rd time
hold it until the Start/Stop LED flashes.
5. Release the Start/ Stop button
If the Start/Stop LED has not started to flash within approx. 4 sec., the accessing
procedure must be repeated.
Acknowledgement Indicator
Successful accessing of the Service mode is indicated by a slow flashing Start/Stop
LED (1 Hz).
Options
Refer to Tables: 6-21 through 6-22.
To Next Page
Loading...
