Miele G2000 - Connecting Strip (Lower Support) - Removal

Technical Information
76
G1000 / G2000 Dishwashers
Figure 5-19: Cover Plate Removal
5.3.4 Connecting Strip (Lower Support) – Removal
Important
The connecting strip should only be removed with the appliance
uninstalled, and positioned on its back.
Do not attempt to remove the connecting strip with the appliance installed
in an upright position.
1. Remove the toe kick (plinth) (5.3.2).
2. Remove the cover plate (5.3.3).
3. Remove the drip pan (5.1.2)
4. Remove the retaining screws, Figure 5-20.
5. Unscrew the machine feet slightly.
6. Carefully remove the connecting strip. See note below.