Miele G2000 - Page 135

Technical Information
G1000 / G2000 Dishwashers
Flashing
Rhythm of
Intake/Drain
Lt.
Function Programming Display
Flashing Rhythm of
Rinse LED
Long Short Long Short Display
- -
Pos. 0:
Software
version ID
check
Do not press the
Program button.
The Rinse & Hold
LED is off.
The Rinse LED is
off. Shows the
software version ID
No., e.g. -769
- - -
Long Short Long Short Display
- - F0
- 1 F1
- 2 F2
1 1 F11
1 2 F12
1 3 F13
1 4 F14
1 8 F18
1 9 F19
2 4 F24
2 5 F25
2 6 F26
4 - F40
5 1 F51
6 9 F69
7 - F70
- 1
Pos. 1:
Fault
memory
display and
deletion
Press the Program
button once. The
Rinse & Hold LED
flashes once rapidly
intermittently. Press
the Start/Stop
button.
Press it again to
display fault codes
that may have been
saved. To delete
the fault memory,
press the Start/Stop
button again and
hold it for 4 sec.
The Rinse LED is
off or flashes to
show the fault code
number alternately
see 6.7, Fault code
summary. If the
fault memory is
empty, the Rinse
LED is off.
8 8 F88
Table 6-21: G2140 Service Mode Options (Continued on Table 6-22).
135