Miele G2000 - Page 132

Technical Information
132
G1000 / G2000 Dishwashers
Flashing
Rhythm of
Intake/Drain
Lt.
Flashing Rhythm of
Sani-Wash Lt.
Function Programming Display
Long Short Long Short Display
- - P0
2 3
Pos. 23:
Water
quantity
normal /
increased
(from
software
version ID
No. –876)
Press the Program
button 22 times. The
Rinse & Hold LED
flashes 2 times slowly
and 2 times rapidly
intermittently. Press
the Start/Stop button
as appropriate to
make the desired
setting.
The Rinse LED is
off or flashes. The
display shows P
and a digit
alternately: P0 =
Normal water
quantity (standard
setting); P1 =
Increased water
quantity.
- - P1
Long Short Long Short Display
- - P0
2 6
Pos. 26:
Second
interim
rinse
selection
(from
software
version ID
No. –984)
Press the Program
button 26 times. The
Rinse & Hold LED
flashes 2 times slowly
and 6 times rapidly
intermittently. Press
the Start/Stop button
as appropriate to
make the desired
setting.
The Rinse LED is
off or flashes.
Setting options: P0
= Standard setting;
P1 = With second
interim rinse.
- 1 P1
Long Short Long Short Display
- - P0
2 7
Pos. 27:
Extended
drying time
(from
software
version ID
no.-818)
Press the Program
button 27 times. The
Rinse & Hold LED
flashes 2 times slowly
and 7 times rapidly
intermittently. Press
the Start/Stop button
as appropriate to
make the desired
setting.
The Rinse LED is
off or flashes.
Setting options: P0
= Normal drying
time; P1 =
Extended drying
time.
- 1 P1
Long Short Long Short Display
- - P0
3 6
Pos. 36:
Machine
height
setting
(from
software
version ID
no.-818) *2
Press the Program
button 36 times. The
Rinse & Hold LED
flashes 3 times slowly
and 6 times rapidly
intermittently. Press
the Start/Stop button
as appropriate to
make the desired
setting.
The Rinse LED is
off or flashes.
Setting options: P0
= Normal machine
height (G1xxx); P1
= XXL model
(G2xxx).
- 1 P1
Table 6-19: G2140 Program Mode Options (Cont. from Table 6-18) (Cont. on Table 6-20)