Miele G2000 - Page 141

Technical Information
G1000 / G2000 Dishwashers
Flashing
Rhythm of
Intake/Drain
Lt.
Function Programming Indication
Flashing Rhythm of
SaniWash LED
Long Short
Long Short Display
- -
0ml
- 1
1ml
Press the Program
button 3 times.
The Intake/Drain
LED flashes 3x
rapidly
intermittently.
- 2
2ml
- 3
3ml
- 4
4ml
- 5
5ml
- 3
Pos 3: Set
amount of
rinse aid
dispensed
To modify the
dispensing amount,
press the Program
button and hold it
until the
Intake/Drain LED
flashes. Then use
the Program button
to enter the desired
setting changes. *2
The current setting
can be seen from
the flashing rhythm
of the SaniWash
LED. If he LED
flashes 3x briefly
intermittently, this
indicates a factory
setting of 3ml.
Setting range: 0-6
ml.
- 6 6ml
Long Short
Long Short Display
Press the Program
button 4x
The Intake/Drain
LED flashes 4x
rapidly
intermittently.
- - P0
- 4
Pos 4:
Buzzer
on/off
To change the
setting, press the
Program button
and hold it until the
Intake/Drain LED
flashes. Then press
the Program button
to enter the desired
setting changes. *2
SaniWash LED off
= Buzzer is
actuvated (factory
setting). SaniWash
LED flashes =
Buzzer is
deactivated.
- 1 P1
Table 6-24: G1180 / G2180 Programming Mode Options (Cont. from Table 6-23) (Cont. on Table 6-25)
141