Technical Information
70
T 80xx
4 5.5-Kilo Dryer Electrical Requirements
We would like to clarify the electrical requirements of the new
5.5-kilo dryers; this pertains to models T 8002, T 8003, T 8005, T 8012C,
T 8013C and T 8019Ci.
The units can be connected to a 15-amp circuit.
The dryer can be connected to a Miele 057 or 060 EZ-Install box.
The dryer cannot be connected to a Miele 027 or 030 EZ-Install box.
It is safe to connect this machine to a circuit protected up to 30 amps. The
data tag shows 30 amps because the cable and the plug are sized for 30
amps. That doesn’t mean that 30 amps is the one and only circuit breaker
size you can use. Protecting a circuit wired for 30 amps with a 15-amp circuit
breaker is allowed.
To Previous Page
Loading...
Need help?
General
