Need help?Do you have a question about the Miele T 980x and is the answer not in the manual?
General| Appliance type | Tumble dryer |
|---|---|
| Capacity | 5 kg |
| Color | White |
| Loading type | Front load |
| Programs | Cotton, Synthetic, Delicate |
| Dimensions (H x W x D) | 850 x 595 x 580 mm |
General safety guidelines for appliance operation and servicing.
Specific safety measures for gas dryers, including gas supply and ventilation.
Hazards of lint buildup and fire prevention methods.
Steps for correctly restoring ground connection after panel removal.
Diagram showing electrical component locations for the T 980x model.
Diagram showing electrical component locations for the T 982x model.
Technical specifications regarding the dryer's casing construction.
Procedures for removing the lid and front panel for service.
Technical data and functional description of the dryer's door and lock.
Explanation of how the door lock operates and is registered.
Steps for removing and servicing the door, hinge, and lock.
Technical specifications for drum, bearing, moisture sensor, and heater bank.
Explains operation of no-load detection, moisture sensing, and heater control.
Troubleshooting common faults related to temperature limiters and sensors.
Procedures for removing the heater bank and rear bearing.
Technical data for the gas heating system, including burner and solenoid valves.
Explains gas unit operation, ignition sequence, and safety time.
Procedures for inspecting gas pressure, limiters, and burner functionality.
Detailed steps for removing and installing gas solenoids and the burner.
Technical data for the motor and fan components.
Step-by-step guide for replacing the fan impeller.
Detailed instructions for replacing the dryer's motor.
Technical data for the air shield, filter, and temperature sensor.
Diagnosing and fixing vibration noises from the base plate.
Procedures for removing the air shield and replacing its felt seal.
Technical specifications for the control panel and electronic module.
Explains drying technology, reversing, and power interruption handling.
Details on programming functions, drying outcomes, and memory.
Troubleshooting common error codes and LED indicators.
Instructions for accessing and using programming, demo, and service modes.
Technical data for fuses and heater relays in the electrical system.
Procedures for replacing fuses and removing heater relays.
To Next Page
