Technical Information
42
T 980x/T 982x
Figure 040-1: Fan Impeller Removal
9. Install the new fan impeller, and secure it with the 10-millimeter bolt.
10. Reinstall the air shield.
11. Reinstall the metal bracket in front of the air shield.
12. Reinstall the right side panel, making sure that the grounding screws are in
their proper positions.
13. Reinstall the front panel.
14. Reinstall the electronic's support panel, the electronic, and the fascia panel.
15. Reconnect the machine to the power supply and test it for correct operation.
16. Once correct operation has been verified, reinstall the lid.
To Next Page
Loading...
