Technical Information
48
T 980x/T 982x
reverse order.
11. Reinstall the metal bracket in front of the air shield.
12. Hook the tension spring back onto the intermediate drive notch, using
needlenose pliers if necessary.
13. Reinstall the right side panel, making sure that the grounding screws are in
their proper positions.
14. Reinstall the front panel.
15. Reinstall the electronic's support panel, the electronic, and the fascia panel.
16. Reconnect the machine to the power supply and test it for correct
operation.
17. Once correct operation has been verified, reinstall the lid.
To Next Page
Loading...
