Miller Syncrowave 210 - Section 4: Specifications; Included with Your Unit; Serial Number and Rating Label Location

. A complete Parts List is available at www.MillerWelds.com
OM-261726 Page 10
SECTION 4 − SPECIFICATIONS
4-1. Included with Your Unit
1 12 ft (3.7 m) Work Cable
With Clamp And
Quick-Connect
2 WP1712SFDI 150 Amp
TIG Torch with 12 ft (3.7 m)
Cable And Quick-Connect
3 Electrode Holder and
Quick-Connect
4 Gas Hose
5 Gas Regulator
6 Power Cable Adapter
7 Cable/Torch Hanger
8 Foot Pedal Holder
9 RFCS-14 Foot Control with
20 ft (6 m) Cable
. Some assembly is required.
For options and accessories see
back of book or contact your dis-
tributor.
1
2
3
4
5
9
805522-A
6
7
8
4-2. Serial Number And Rating Label Location
The serial number and rating information for the power source is located on the rear of the machine. Use the rating labels to determine input power
requirements and/or rated output. For future reference, write serial number in space provided on back cover of this manual.
Notes