Miller Syncrowave 210 - Section 5: Installation; Selecting a Location

. A complete Parts List is available at www.MillerWelds.com
OM-261726 Page 13
SECTION 5 − INSTALLATION
5-1. Selecting A Location
! Special installation may be
required where gasoline or
volatile liquids are present −
see NEC Article 511 or CEC
Section 20.
1 Line Disconnect Device
2 Running Gear
Locate unit near correct input pow-
er supply.
For information about sources of
high-frequency see Section 10.
Movement
1
18 in. (460
mm)
Location And Airflow
18 in. (460 mm)
18 in. (460 mm)
18 in. (460 mm)
! Do not move or operate unit
where it could tip.
loc_cart mount 2015-08
2