Millipore ICW-3000 - 6-2 HOW TO REPLACE THE SIMPLIPAK CARTRIDGE

MAINTENANCE
- 28 -
HAZARD
!
6-2 HOW TO REPLACE THE SIMPLIPAK CARTRIDGE
Do not touch the UV Lamp when replacing the SimpliPak
Cartridge.
R
EMOVING THE SIMPLIPAK CARTRIDGE
 Remove the front cover to go into STANDBY
mode. Press the Main Button. Wait for the
system to depressurize. The Display will show
STANDBY blinking for 10 seconds.
 Remove the Final Filter.
 Press your thumbs on the system (A).
 Swing the Cartridge towards you (B).
 Remove the pack from the system (C).
A
B
C