MAINTENANCE
- 31 -
Hazard
!
6-3 INLINE FILTER REPLACEMENT
The inline filter is usually replaced with the SimpliPak Cartridge. If the flow rate becomes low due to
clogging, replace the filter immediately.
Make sure that the SimpliPak Cartridge has been hydrated
overnight.
Do not touch the UV lamp when replacing the inline
filter.
Remove the final filter and front cover in order to change the system to standby mode (A).
Unplug the power cable (B).
Release the tubing connected to the filter from
the clip (C and D).
A
B
C
Attention
To Next Page
Loading...
