Millipore ICW-3000 - Installing the New UV Lamp

MAINTENANCE
- 36 -
I
NSTALLING THE NEW UV LAMP
 Ensure that you use the gloves supplied with the
UV replacement kit. Plug the electrical cable to
the new UV Lamp (G).
 Carefully insert the UV Lamp into the UV
housing (H).
 Attach the UV housing with the Velcro belt (I).
 Install the SimpliPak Cartridge (J).
 Install the Final Filter.
 Close the front cover.
 Plug the electrical cord to power ON the system.
 Reset the UV Timer. See Section 6-6 How to
View or Reset the UV Lamp Timer (C03).
G
H
I
J