- 5.21 -
Setting time [TIME SET]
The device incorporates a calender. [TIME STAMP] function of the FUNCTION mode displays the
date and time depending on this setting.
page 4.9
STEP
1. Select the [TIME SET].
2. Push the [ENTER] key.
3. Set the date.
Press the [ ] and [ ] jog keys to select the digit.
Press the [
] and [ ] jog keys to change the value.
4. Push the [ ] and [ ] key to select the [TIME].
5. Set the time.
Press the [ ] and [ ] jog keys to select the digit.
Press the [
] and [ ] jog keys to change the value.
6. Push the [ENTER] key.
7. Displays the set date.
Press the [ ] and [ ] jog keys to display the time setting.
8. Push the [END] key twice, the device returns to
the LOCAL mode.
MAINTENANCE
TIME SET < ent >
MAINTENANCE
DATE = 2 0 0 2 . 1 0 . 0 2
MAINTENANCE
TIME = 1 6 : 2 0 : 0 7
MAINTENANCE
DATE = 2 0 0 2 . 1 0 . 0 2
< LOCAL >
width : 1272 mm
To Next Page
Loading...
Need help?
General