MIMAKI JV3-160S - Types of Medium that Can be Used

- 1.13 -
Types of medium that can be used
The types of medium that can be used with the device are roll medium and cut sheet medium.
The types and sizes of medium that can be used with the device are explained below.
Types of medium that can be used
•Tarpaulin
• FF (Flexible Face)
• PVC
Sizes of medium that can be used
Medium Size JV3-160S
Maximum 1620 mm
Minimum 210 mm
Plotting width 1610 mm
In case setting high-speed scan mode, the maximum scope is 1570 mm.
Thickness 1.0 mm or less
Roll outside diameter Ø 180 mm or less
Roll weight 25 Kg or less
( Without slack on the roll when it is retained at both ends )
Roll inside diameter 3 or 2 inches
Plotting surface Faces OUT
Roll end treatment Light-adhesive tape is used to allow the paper to be removed
from the core with ease.
Maximum 1620 mm
Minimum 210 mm
Plotting width 1610 mm
In case setting high-speed scan mode, the maximum scope is 1570 mm.
Roll medium
Cut sheet
medium