MIMAKI JV3-160S - If Nozzles Are Clogged Even after the Cleaning Function Is Executed; [Fill up Ink]; Wash]

- 5.11 -
If nozzles are clogged even after the cleaning function is executed
If nozzle clogging is resolved after HEAD CLEANING ( page 2.21) and NOZZLE WASH
(
page 3.7) perform the following functions.
1. [FILL UP INK] : The device is charges ink.
2. [WASH] : Cleans the head, tube, and damper with the dedicated cleaning fluid (option).
[FILL UP INK]
1. Select the [FILL UP INK].
2. Push the [ENTER] key.
Filling of ink is started automatically.
3. When filling of ink is completed, the menu
returns.
4. Push the [END] key twice, and the menu re-
turns to the LOCAL mode.
[WASH]
• The washing liquid (SPC-0335) is separately available from your local
distributor.
1. Select the [WASH].
2. Push the [ENTER] key.
3. Take out the ink cartridge.
Discharge of the filled ink is started.
MAINTENANCE
FILL UP INK < ent >
FILL UP
∗ ∗ ∗ ∗ ∗ ∗ − − − − − − − − − −
MAINTENANCE
FILL UP INK < ent >
< LOCAL >
width : 1272 mm
MAINTENANCE
WASH < ent >
WASH
REMOVE CARTRIDGE