- 5.2 -
Maintenance of the device
The term “maintenance” as used herein refers to the operation that has to be performed to keep the
device in good operating condition.
To carry out maintenance of the device, select [MAINTENANCE] from the function menu and
make the necessary settings.
Invoking a maintenance function
In order to execute any of the maintenance functions, it is necessary to perform the following opera-
tion on the operation panel.
You have to understand how to invoke the desired maintenance function to carry out maintenance.
STEP
1. Make sure that the mode is LOCAL mode.
2. Push the [FUNCTION] key.
3. Push the [
] and [ ] key until the display gives
the indication [MAINTENANCE].
4. Push the [ENTER] key.
5. Select the next operation.
Set up the desired maintenance function to carry out mainte-
nance.
page 5.3
< LOCAL >
width : 1272 mm
FUNCTION
SET UP < ENT >
FUNCTION
MAINTENANCE < ENT >
MAINTENANCE
STATION < ent >
To Next Page
Loading...
